ISTech Support Forum

ISTech Support Forum
http://www.istechforum.com/YaBB.pl
Evo-ERP and DBA Classic >> Problem Reports - Repeatable >> Same item # on more than 1 BOM line
http://www.istechforum.com/YaBB.pl?num=1187794452

Message started by kevind on 08/22/07 at 07:54:11

Title: Same item # on more than 1 BOM line
Post by kevind on 08/22/07 at 07:54:11

We have some BOM's that have a given item # listed more than 1 time.

This is necessary when there are different Notes for groups of items (ie Different Bend # on a resistor, etc.).

We recently had this happen:
1. All items were issued for a WO. The 'list' method was used, and all line items were issued.
2. The WO was completed
3. During Entry of finished production, a message was displayed that said all items had not been issued.
4. Checked the Material issue report, all items were listed in the correct quantities.
5. Looked at the 'Material' Screen in WO-A, and the item that showed up on more than 1 line showed
200% for the first instance and 0% for the second.
6. Backed out both issues in Issue Material.
7. WO-A now showed both items at 0%
8. Kit issued the WO with a Quantity of 0. (this automatically issues any remaining material)
9. WO-A 'Material' screen now showed both items at 100%.
10. Went to Enter finished production for this WO.
??? A message displayed that said all items had not been issued for this WO ???
11. Backed out of enter finished production
12. Checked WO-A Materials again, and the screen changed to 200% for the first instance and 0% for the second.

It would appear that during an attempt to enter Finished Production (nothing was saved),
the distribution of material issued changed in the WO-A screen.

The workaround we did was to again back out the issues of this item and let the entry of Finished Production backflush them.

Title: Re: Same item # on more than 1 BOM line
Post by JEMM on 08/22/07 at 08:48:30

What update are you currently using or what is the ISTS Enhancement date of WOG?

Title: Re: Same item # on more than 1 BOM line
Post by kevind on 08/22/07 at 13:18:19

Update dates and versions in Signature are correct.
Behavior was observed on a Classic Workstation.

ISTECH Enhancement Date of WO-G is 2/12/07.

Title: Re: Same item # on more than 1 BOM line
Post by kevind on 09/30/08 at 12:35:26

Has this been confirmed or fixed?